Filter_Flier _11_25_14U-Pg1-2

Mint 400, Las Vegas March 14th 2015 – Annual Desert Off Road Race

Dougans Racing Engine and Kinsler Dragon Claw Fuel Injection

1st TO FINISH!!! OVERALL CHAMPION of all 6 classes
Justin Lofton, Truck #41
Races in the 1400/P Trick Truck Class

Ken Block’s Kinsler Injected Mustang


Click below to see Ken Block drive a Kinsler injected Mustang


IMSA 2014 Champion

The SRT Motorsport’s Dodge Viper GTS-R
#91 and #93 with Roush powerplants

Viper_93_Champion_14 GTLM Series. We partnered with SRT and Roush on this program.

ViperV10_Ver2_0435_Crop Viper V-10 Manifold for SRT program. These ran at The 24 Hours of LeMans.

American Le Mans Series Viper V10

Viper GTS-R manifold designed and machined by Kinsler for Roush Industries.  We worked with
Roush on the development and packaging of this billet aluminum manifold.

Transverse throttle shafts with ball bearings.  Special progressive linkage works with their “blipper”
motor to synchronize throttles for transmission gear changes.

Viper GTS-R #91 leading the Corvette #4 at the 12-Hours of Sebring on March 17, 2013





Knoxville_Nat_2014_Return (1)


See Kinsler’s Honda Plenum/Manifold and K-140 Pressure Relief Valve on:

       pn footer logo   Engine Power Logo
TV show   Episode #13
On the internet starting May 25th  2014 at: 



Features all ball bearing support of the longitudinal throttle shafts, including the bearing between each set of butterflies. This gives super smooth throttle action, allowing better control of the car on the track.

These manifolds can accommodate any port design the customer wants. Kinsler can help the customer select a port for his engine combination, by varying both the shape and volume of the CNC ported runners.   The manifold was released in February, and Kinsler has already made some extreme variations to suite their customers. Some have been made for EFI road racing and for street use, with throttle position sensors, fuel rails, and nozzle bosses for EFI nozzles.

World of Outlaws, Tucson AZ   March 8th 2014

1st Place: Brad Sweet Car #49 of Kasey Kahne Racing Engine by Speedway Engine Development Inc., Indianapolis

Kerry Madsen, driving the #29 car of Keneric Racing won the Stockton, CA race on 3-22-14 using a Morrison Racing Engines engine.

Both Sweet and Madsen use a Kinsler Billet 410 Manifold Both Sweet and Madsen use a Kinsler Billet 410 Manifold

 NewModel HP (high pressure) Nozzle Lines Slim, sleek, lightweight

The line end fittings and collars are our own design, made in stainless.
The lines are assembled in our shop, using an eight-crimp die set.
They have a 5/16” hex at the barrel valve for easier installation.
You can rotate the fitting in the line after installation.
The PVC sheath is crimped under the collar; no braid showing; protects from dirt.The fitting for the nozzle has a 45-degree seat to properly match the angle on the nozzle.
It is bent 65 degrees to let the lines run snug over the valve covers.The line is smooth bore Teflon 3/16”ID, with stainless braid, covered
with black PVC, .275 OD. This is rated at 3,000 psi working pressure, with a minimum burst pressure of 14,000 psi. We have tested ten of these line assemblies to 15,000 psi without a failure.HPHP Series W Nozzle 1940 crop web

52nd Rolex 24 At Daytona, Jan 25-26, 2014


GM Engine by ECR with Kinsler LS injection

Won by Joao Barbosa, Christian Fittipaldi, and Sebastien Bourdais in the No. 5 Action Express Racing Corvette DP.


Daryn Pittman just squeaked it out at the Charlotte World Finals, supported by Kale Kahne, Crew Chief of the Year, and the crew of the Great Clips #9.  The Kasey Kahne Racing organization made a superior effort all year long!


Speedway Engine Development won the 2013 Engine Builder of the Year…  congrats to Rick Long, Jay Wood and staff.  They do the engines for #9.  They use the Kinsler Beast manifold on Daryn’s engines.


Megan Mandic, Mike Carber, Michelle Kahne, Kale Kahne, Mandy Pittman, Taylor Pittman, Daryn Pittman, Tawny Carpenter, Kolten Gouse, Willie Kahne, Doug Stringer

New Series 2 Tough Pump

Sizes: 8.68 GPM, 10.62 GPM, & 12.58 GPM at 4,000 Pump rpm, at 100 psi pressure.
These are just as rugged as the Series 1 Tough Pumps; will handle dirt in the fuel better than any other pump.


Applications: 600 plus cubic inch naturally aspirated Methanol, Supercharged or Turbocharged Methanol up to 2,000 HP, Top Fuel Harley Davidson (requires special seals for nitro). These pumps are good to 300 psi continuous.

The biggest problem racers have with their mechanical fuel pumps is wear, due to gears and housings that aren’t hard  enough. Our pump has very hard gears and a hardcoated housing to hold up very well against dirt… we have yet to have one wear out in the field due to dirt passing through them.

Total pump failures are another problem. Our pumps are made with very premium metals, coatings, and very close tolerances to give extreme durability… we have never had one of our pumps fail in the field.

See the bottom of this page and our “Pump” page for more details

INDY 500 Sunday, May 27, 2012


It was great watching Dario Franchitti win his third Indy 500, with his Chip Ganassi Racing teammate Scott Dixon taking second; both running Honda Engines. We had our equipment on both of these cars.

uring qualifying, Chevrolet engines took the ten top spots, so it looked like they might dominate the race. After being absent from Indy since 2003, they had come back with a vengeance!

Final top twelve, by engine: Honda, Honda, Chevrolet, C, C, C, H, H, H, C, C, H.
We had our equipment on ten of these 12 cars and on most of the rest of the field.

February 27-28, 2012


Congratulations to Matt Kenseth for winning this wettest, fieriest, and most delayed NASCAR Cup race ever! He drove an impressive race in his Roush Fenway Racing #17 Ford, owned by John Henry, with Jimmy Fennig as crew chief.
All five top finishers ran Kinsler F.I. components,as well as 36 of the 43 cars that started the race.
Click the third green button from the left at the top of this page.

The Outlaws know how to get PUMPED UP !!! World of Outlaws from Las Vegas — March 8, 2012


Pos. Driver Car #  Fuel Pump

1 -Tim Kaeding            #83JR       Tough Pump
2 -Jason Sides             #7S                 other
3 -Steve Kinser            #11           Tough Pump
4 -Chad Kemenah       #63           Tough Pump
   5 -Brian Brown            #21           Tough Pump

6 -Sammy Swindell      #1            Tough Pump
7 -Jason Meyers         #14           Tough Pump
8 -Tony Stewart          #14S         Tough Pump
9 -Donny Schatz         #15           Tough Pump
10 -Kraig Kinser           #11K         Tough Pump

50th Running of The Rolex 24-Hours of Daytona

Kinsler’s modular Ford cross-ram manifold injected the Roush-Yates Engine\’s that powered the 1-2-3 Over-All finish.

1st – #60 Michael Shank Racing with Curb-Agajanian driven by Allmendinger/Negri/Pew/Wilson
2nd – #8 Starworks Motorsport driven by Dalziel/Luhr/McNish/Popow/Potolicchio
3rd – #6 Michael Shank Racing with Curb-Agajanian driven by Goncalvez/McDowell/Nasr/Yacaman

Congratulation to the ALL the teams and the staff of Roush-Yates Engines.

A special “hats off” to John Maddox, Roush-Yates Engines’ Daytona Prototype/Road Racing program manager


Donnie Bowles / Propane Injected Kinsler Modular Ford Manifold

Engine Built by Roush Competition Engines
Won 2012 NMRA Modular Muscle Class
18th Annual Spring Break Shootout in Bradenton, FL Motorsports Park, March 1-4
9.775 seconds @ 136.10 MPH

Two Guys Garage with Kinsler Fuel Injection

Click here to view a short video clip
Click here for full video