Kinsler 2026 Price List

Part No. Description List Resale DEALER 2026 PRICE SHEET KINSLER FUEL INJECTION 1/14/2026 LABOR: Machining & Finishing Work On Kinsler Spun Aluminum Ramtubes 7890 Labor; polish 8 aluminum traditional bell ramtubes to "Show Quality" finish, $ per 8 pieces 832.60 616.70 618.35 7891 Labor; polish 8 aluminum 180 deg. bell ramtubes to "Show Quality" finish, $ per 8 pieces 1098.10 813.40 815.60 7892 Material & Labor; brite dip and anodize eight spun aluminum ram tubes, 479.00 354.80 355.85 call for colors, $ per 8 pieces NOTE: Call for pricing on quantities less than eight for polishing and/or anodizing. 7893 14mm Lucas Nozzle Boss; for aluminum ramtubes, 6061 aluminum, $ each 39.60 29.30 29.55 7894 Faring; must use with above nozzle boss, 6061 aluminum, $ each 25.30 18.70 18.80 7895 Material & Labor; weld 14mm nozzle bosses & farings on one set 1508.30 1117.20 1120.20 of eight ramtubes, includes nozzle bosses & farings, $ per 8 tubes 7889 Labor; cut ("ONLY") any ramtube to overall length specified by customer, $ each 25.00 18.50 18.65 7896 Labor; notch bell only for siamese top adapter, $ each 34.10 25.20 25.45 7900 Labor; cut 180 ramtube to specific length and notch bell for siamese installation, $ each 56.50 41.80 42.00 Traditional Ram Tube Modifications: 7889 Labor; cut ("ONLY") any ramtube to overall length specified by customer, $ each 25.00 18.50 18.65 7897 Labor; turn O.D. at bell to fit K&N #5120 & #5121, 8 pieces minimum, $ each 25.60 18.90 19.05 7898 Labor; turn O.D. at base to fit top adapter and cut to length , $ each 74.40 55.10 55.35 7899 Labor; same as #7898 plus notch bell for siamese top adapter, $ each 86.40 64.00 64.25 7901 Labor; turn O.D. at base to fit top adapter. NO OTHER MACHINING $ each 62.00 45.90 46.20 Kinsler Ram Tube Adapter Bore sizing: 2 3/16" throttle bore has top adapter bore of 2.345" I.D., +.002"/ -.000" 2 1/4" throttle bore has top adapter bore of 2.375" I.D., +.002"/ -.000" 2 3/8" throttle bore has top adapter bore of 2.500" I.D., +.002"/ -.000" 2 7/16" throttle bore has top adapter bore of 2.575" I.D., +.002"/ -.000" 2 1/2" throttle bore has top adapter bore of 2.655" I.D., +.002"/ -.000" 2 5/8" throttle bore has top adapter bore of 2.758" I.D., +.002"/ -.000" 2 11/16" throttle bore has top adapter bore of 2.795" I.D., +.002"/ -.000" 2 13/16" throttle bore has top adapter bore of 2.948" I.D., +.002"/ -.000" 2.900" throttle bore has top adapter bore of 3.008" I.D., +.002"/ -.000" COVERS: For Ramtubes, With KFI Logo 1911 Cover; small & big block Chevrolet, equal length ramtubes, black naugahyde TOP ADAPTERS, O-RINGS & GASKETS 7243 Blower Gasket; For 8-71 supercharger, fits between hat and blower, no screen 28.10 20.80 21.00 7245 Blower Screen/Gasket; For 6-71 supercharger, fits between hat and blower 41.10 30.40 30.65 7246 Gasket Set; Crower ramtube adapters on big bk Chev injection, 4/set *** DISCONTINUED *** 7247 Gasket Set; Crower ramtube adapters on sm bk Chev injectionj, 4/set 61.20 45.30 45.55 7244 Gasket Set; Hilborn sm bk Chev inj, siamese window port, 4/set 20.40 15.10 15.30 7240 O-ring Set; Kinsler top adapters to ramtubes, 2 3/16" to 2 1/2" S.B. Chev.inj., 10/set 45.30 33.50 32.00 7249 O-ring Set; Kinsler top adapters to manifold, 2 3/16" to 2 1/2" S.B. Chev.inj., 10/set 39.90 29.50 28.10 7248 O-ring Set; Kinsler top adapters to manifold on 2.9" B.B. Chev. injection, 10/set 41.50 30.70 30.85 7500 Top Adapters; convert 5 angle 2 3/16" Hilborn S.B. to straight up/vertical ramtubes 397.40 294.30 295.25 for use with K&N double ramtube filters, plastic, 4/set 7501 Top Adapter; one only, replacement for above set part #7500 137.20 101.60 102.00 14081 Gasket; Holley 4150 standard, open style 11.30 8.30 8.35 14082 Gasket; Holley 4500 Dominator, open style 11.30 8.30 8.35 14083 Gasket; Holley 4500 Dominator, 4-hole style 11.30 8.30 8.35 Page 64 of 82