Kinsler_Handbook_#32 December 2017

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 170 SHUT-OFF VALVES DSR SHUT-OFF Anodized aluminum, spool type (stainless steel), arm has stop pin to keep valve from over rotating, rotates 90 o closed to wide open, 1.810” total travel. 6098 Inlet: 6 AN male plus nut & o-ring, outlet: 6 AN male flare Overall length: 2.250", weight: 0.15 lb 6099 Inlet and outlet: 6 AN male flare Overall length: 2.450", weight: 0.15 lb #6099 #6098 SPRINT SHUT-OFF Anodized aluminum, spool type (stainless steel), arm has stop pin to keep valve from over rotating, rotates 90 o closed to wide open, 2.121” total travel. Side port can be used for bypass valve, this port DOES NOT SHUT OFF . In- cludes arm and port plug. 6034 Inlet: 6 AN male plus nut & o-ring, outlet: 6 AN male flare, side port: 6 AN female with port plug. Overall length: 2.075", height with plug installed: .775", weight: 0.15 lb 6031 Inlet and outlet: 6 AN male flare, side port: 6 AN female with port plug. Overall length: 2.075", height with plug installed: 2.050", weight: 0.20 lb © 2017 #6034 #6031 FITTINGS - We offer a complete line of adapter fittings, see Pages #180-183. SHUT-OFF WITH FILTER - PANCAKE STYLE Anodized aluminum housing, 12 AN female ports inlet and outlet, housing held together with three 7/16” hex bolts. 90 0 travel, 2.882” total travel. Housing has two 1/4-20 thread- ed holes for mounting on pad at edge of largest diameter. Mounting holes on 2.0” center to center. Filtration: one 3.1” diameter, cleanable, stainless steel screen. Element available in two micron ratings (see below). 4906 Filter assembly with shut off valve complete. Dimensions are at largest points: 4.320" diameter x 5.60" long (without fittings), weight: 2.25 lb (without fittings) 4907 Element, stainless steel, 40-mesh, one required 4908 Element, stainless steel, 40-micron, one required 4912 O-ring, for #4905 and #4906 filter housing, one required The arm is spring loaded and equipped with detents to secure the valve in the open position. When rotated from the full open position the valve will snap closed. #6095 12 AN AND 16 AN SHUT-OFF VALVE 6095 12 AN male flare bulkhead x 12 AN male flare, gasoline and methanol ONLY. Seal assisted ball type shut-off, arm rotates 90 degrees closed to wide open, .600" I.D. straight through, overall length: 4.250", width: 1.5", height: 2.550", weight: 0.55 lb 6033 16 AN male flare x 16 AN male flare, stainless steel, gasoline and methanol ONLY. Seal assisted ball type shut-off, arm rotates 90 degrees closed to wide open, .685" I.D. through ball, end cap is tapered from .850" at flare tip to.685" at ball, overall length: 3.400", width: 1.5", height: 2.600", weight: 1.35 lb

RkJQdWJsaXNoZXIy ODE2MjA=