{"id":19072,"date":"2017-02-15T18:53:11","date_gmt":"2017-02-15T18:53:11","guid":{"rendered":"http:\/\/kinsler.com\/Shop\/product\/item-1-see\/"},"modified":"2019-11-20T16:45:48","modified_gmt":"2019-11-20T16:45:48","slug":"item-1-see","status":"publish","type":"product","link":"https:\/\/kinsler.com\/Shop\/product\/item-1-see\/","title":{"rendered":"‘HP’ Series Nozzle Hoses"},"content":{"rendered":"

Model HP (high pressure) Nozzle Lines —- Slim, sleek, lightweight !!!<\/strong><\/h2>\n

The lines are made to order and assembled in our shop, using an eight-crimp die set and each line is pressure test and checked for flow.<\/p>\n

The line end fittings and collars are a Kinsler<\/strong> design, made in stainless steel.<\/p>\n

The barrel valve end is a 5\/16\u201d hex for easier installation.<\/p>\n

You can rotate the fitting in the line after installation, this keeps the line from ‘wrapping up’ during installation.<\/p>\n

The PVC sheath is crimped under the collar; no braid showing: protects from dirt.<\/p>\n

The fitting for the nozzle has a 45-degree seat to properly match the angle on the nozzle.<\/p>\n

The nozzle ends are stocked in straight, 65-deg, or 90-degree….custom bends are available.<\/p>\n

For Sprint Car ‘down’ nozzle lines, a 65-degree bent is typical, it lets the lines run snug over the valve covers.
\nThe line is smooth bore Teflon 3\/16\u201dID, with stainless braid, covered with black PVC, .275 OD. This is rated at 3,000 psi working pressure, with a minimum burst pressure of 14,000 psi. We have tested ten of these line assemblies to 15,000 psi without a failure. Contact us for pricing and other information.<\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div>
\n
\n

<\/p>

    <\/ul><\/div>\n
    \n
    \n<\/fieldset>\n

    Your Name (required)\n<\/p>\n

    <\/span>\n<\/p>\n

    Your Email (required)\n<\/p>\n

    <\/span>\n<\/p>\n

    Subject\n<\/p>\n

    <\/span>\n<\/p>\n

    Your Message\n<\/p>\n