Kinsler 2026 Price List

Part No. Description List Resale Dealer 2026 PRICE SHEET KINSLER FUEL INJECTION 1/15/2026 EFI LABOR TO MODIFY INJECTORS, $ Each 10085 Labor; modify for dual o-ring, #10134, 10136, 10137 42.20 31.20 31.50 10086 Labor; modify for outlet o-ring, #10129 35.80 26.50 26.70 10087 Labor; modify for inlet o-ring, #10100, 10102, 10103, 10105, 10107 78.50 58.10 58.30 10088 Labor; to flow test and group set of eight NEW injectors 552.20 409.00 410.10 10089 Labor; to flow test and group set of eight CUSTOMER'S injectors, test 16 pieces max. 650.90 482.10 483.45 EFI BLANK INJECTOR BODY 10193 Blank Injector; o-ring top & bottom, clip groove, aluminum, black 34.70 25.70 25.00 MISCELLANEOUS INJECTOR PARTS 10095 Inlet adapter with inlet screen; for Injector Dynamics EFI injectors, increases o-ring c-c to 24.50 18.10 18.55 match EV1dimensions, purple anodized billet aluminum with o-ring (14mm). 10189 Inlet Screen with flanged adapter, approx. 20 micron, for EV14 EFI injectors, price per each 15.00 11.10 10.90 10189-4 Same as above, but sold as set of four, priced per each piece 14.20 10.50 10.30 10189-6 Same as above, but sold as set of six, priced per each piece 13.80 10.20 10.05 10189-8 Same as above, but sold as set of eight, priced per each piece 13.50 10.00 9.90 10189-Q Same as above, but sold as 'bulk' at sixteen pieces or more, priced per each piece 13.10 9.70 9.50 0.00 0.00 10190 Inlet Screen; O.E. replacement fits BOSCH top feed EFI injectors >>SUPPLY LIMITED<< 6.30 4.60 4.55 10190-B Inlet Screen; AFTERMARKET replacement fits most top feed EFI injectors, has BLUE basket 6.30 4.60 4.55 10091-SS Inlet Screen; fits Bosch top feed EFI injectors, stainless screen with brass sealing ring 13.70 10.10 9.95 10191 Inlet Screen; AFTERMARKET replacement fits most top feed EFI injectors 3.70 2.70 2.70 10192 Adapter; for injector, has internal & external o-ring 25.30 18.70 18.20 10194 Bung Seal; G.M. type, for outlet of injector 6.70 4.90 4.90 10195 Retainer Clip; for Bosch style injector 3.80 2.80 2.85 10196 Bung Seal; Bosch type, fits tip of injectors # 10100, 10102,10103. 6.00 4.40 4.30 10197 O-ring; for Bosch injector 1.90 1.40 1.45 10198 Inlet Adapter; plastic 4.60 3.40 3.40 10199 Outlet Washer; plastic 3.70 2.70 2.70 11190 Pintle Cap; fits Bosch injector KFI part #10134, #10136 & #10137. This pintle cap does 12.60 9.30 9.10 not fit all Bosch injectors. If you are in question, please send us your injector for us to check for proper fit. 11192 Pintle Cap; orange, for Bosch injector KFI #10105, #10107, #10100, #10102, #10103 (Style #5) 12.30 9.10 8.95 11189 Hose, 5/16" ID, fits inlet of Bosch hose style injectors. # 10100, 10102, 10103 etc. Per Foot, 16.20 12.00 11.65 (approx. 1.5" needed per injector = $1.00) ***Shop time will be required for installation*** 11191 Washer; plated steel, for use with above replacement hose. 1.90 1.90 Page 3 of 20