Kinsler 2026 Price List

Part No. Description List Resale DEALER 2026 PRICE SHEET KINSLER FUEL INJECTION 1/14/2026 KINSLER 3-BAR NON-LINEAR LINKAGE KITS 20223 Linkage kit, 3-Bar, non-linear, SBC Beast manifold, includes pillow block with wide-open 513.70 380.50 381.55 stop post with 3/8" bearing, throttle stop, throttle arm, triangle arm with M-link, spacers and hardware. Can also be utilized on SBC Dragon Claw per GM 20224 Linkage kit, 3-Bar, non-linear, SBC Raptor manifold, includes pillow block with wide-open 543.70 402.70 403.80 stop post with 3/8" bearing, throttle stop, throttle arm, triangle arm with M-link, spacers and hardware. KINSLER JACK SHAFT KITS: Fits Siamese port SB Chevrolet Traditional, Monster, and Mopar manifolds. 20260 Stainless steel jackshaft, 14" long, with (2) 1.0" hex links, (4) rod ends, (2) # 5557 arms, 692.60 513.00 514.40 (1) # 5521 multi-hole pulling arm, throttle stop, and # 5632/5634 bearing pillow blocks. 20261 Titanium jackshaft, 14" long, with (2) 1.0" hex links, (4) rod ends, (2) # 5557 arms, (1) 783.20 580.10 581.70 # 5521 multi-hole pulling arm, throttle stop, and # 5632/5634 bearing pillow blocks. KINSLER JACK SHAFT KITS: "Dragon Claw" SB Chevrolet Siamese port. 20262 Stainless steel jackshaft, 14" long, with (2) 1.0" hex links, (4) rod ends, (2) # 5557 arms, 716.90 531.00 532.50 (1) # 5521 multi-hole pulling arm, throttle stop, and # 5633/5635 bearing pillow blocks. 20263 Titanium jackshaft, 14" long, with (2) 1.0" hex links, (4) rod ends, (2) # 5557 arms, 811.90 601.40 603.00 (1) # 5521 multi-hole pulling arm, throttle stop, and # 5633/5635 bearing pillow blocks. KINSLER JACK SHAFT KITS; "Beast" SB Chevrolet Siamese Port 20252 Stainless steel jackshaft, for use on Beast manifold WITHOUT nozzle bosses (SHORTER CROSS-SHAFT) 692.30 512.80 514.25 20253 Same as above, but for use with Beast manifold WITH nozzle bosses present (LONGER CROSS-SHAFT 692.30 512.80 514.25 TO MOVE PULL ARM OUTWARD) KINSLER JACK SHAFT KITS; "Raptor" SB Chevrolet Siamese Port 20257 Stainless steel jackshaft, for use on Raptor manifold. 727.40 538.80 540.35 NOTE: JACKSHAFT KITS SUPPLIED WITH 14" LONG SHAFT MATERIAL . 16" MATERIAL IS REQUIRED FOR EXTREMELY HIGH PORT HEADS. EXAMPLE: ( RACING HEAD SERVICE/PRO ACTION # 11253 330 HSDN.) KINSLER JACK SHAFT KIT: Fits "HILBORN" SBC Siamese port manifold Model 327-C-8B and 265-C-8U. 20264 Stainless steel jackshaft, 14" long, with (2) 1.25" hex links, (4) rod ends, (2) # 5557 arms, 702.70 520.50 521.95 (1) # 5521 multi-hole pulling arm, throttle stop, and # 5632/5634 bearing pillow blocks. 20265 Titanium jackshaft, 14" long, with (2) 1.25" hex links, (4) rod ends, (2) # 5557 arms, 817.50 605.50 607.15 (1) # 5521 multi-hole pulling arm, throttle stop, and # 5632/5634 bearing pillow blocks. 20268 C5R Chevrolet Jackshaft, 8mm splined, C1144 Stressproof material. (Katech) 20269 20270 JACK SHAFT REPLACEMENT PARTS 20271 Cross-shaft; 10" , stainless steel. 88.20 65.30 65.50 20272 Cross-shaft; 12" , stainless steel. 90.10 66.70 66.95 20273 Cross-shaft; 13" , stainless steel. 91.40 67.70 67.90 20274 Cross-shaft; 14" , stainless steel. 92.90 68.80 69.05 20276 Cross-shaft; 16" , stainless steel. 96.00 71.10 71.40 KINSLER SWING SET LINKAGE KITS and PARTS: 20300 Stand Model 2.9 with shaft, bearings and snap rings. Throttle stop with stop boss, # 5521 1192.40 883.20 885.55 2-pc pull arm, 2-RH and 2-LH rod ends, 2 hex link bars 1.0", 4-# 5557 arms, nuts,bolts,washers. NOTE: The Model 2.9 swing set allows the #5521 pull arm to swing under the shaft bar. These kits may require longer hex bars if the throttle shafts are higher up on the manifold. 20301 Stand Model 2.6 with shaft, bearings and snap rings. Throttle stop with stop boss, # 5521 1254.60 929.30 931.85 2-pc pull arm, 2-RH and 2-LH rod ends, 2 hex link bars 1.25", 4-# 5557 arms, nuts,bolts,washers. 20302 20303 20304 20305 20306 20307 20308 20309 20310 Spring bracket; for Kinsler SBC Beast, 90-deg., stainless steel, mounts on cyl. #2 & 4 54.60 Page 81 of 82