Kinsler_Handbook_#32 December 2017

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 95 BYPASS VALVES KINSLER HIGH FLOW 6 AN JET CANS Body has a micro finished bore for stick free poppet travel and a preci- sion ground stainless steel poppet for long life. Accepts Kinsler or Hilborn jets... has jet sealing o-ring for accurate orifice metering. Can be used for main, secondary, high speed, or port check. Unit has high flow rate versus opening pressure which makes this valve ideal for jet can type high speed bypass when a large quantity of fuel must be bypassed. Uses Kinsler’s standard springs and shims. Available in brass or hard anodized aluminum. Aluminum valve is 67% LIGHTER than the brass valve. SPRINGS FOR 6 AN JET CANS 8 AN H-TYPE JET CAN SPRINGS : LABOR © 2017 For pressure charts on spring and shim combinations for Kinsler high flow 6 AN jet cans, see PRESSURE CHARTS on Page #92 BRASS 3084 Main bypass valve, complete assembly 3076 Secondary bypass valve, complete assembly 3081 High speed bypass valve, complete assembly 3085 End cap ONLY, for brass valve, includes o-rings 3086 Body ONLY, brass 3170 Safety pressure valve, used on IRL systems, complete assembly 150-155 PSI 3172 Pump safety valve, typically used on supercharged fuel systems, complete assembly 190-200 PSI HARD ANODIZED ALUMINUM 3155 Main bypass valve, complete assembly 3156 Secondary bypass valve, complete assembly 3157 High speed bypass valve, complete assembly 3150 End cap ONLY, for hard-anodized valve, includes o-rings 3151 Body ONLY, hard-anodized aluminum 3175 Safety pressure valve, used on IRL systems, complete assembly 150-155 PSI 3177 Pump safety valve, typically used on supercharged fuel systems, complete assembly 190-200 PSI PARTS FOR BRASS AND ALUMINUM VALVES 3074 O-ring set, for end cap, body, and jet sealing, gasoline and methanol 3079 O-ring set, for end cap, body, and jet sealing, nitromethane 3087 Poppet ONLY, precision ground hardened stainless steel 3088 Flow test and set secondary #3076 and #3156 on flow bench 3089 Flow test and set high speed #3081 and #3157 on flow bench 3303 Spring kit, for Kinsler and Hilborn 6 AN jet can, consists of: .016", .018", .019", .021", .024" 3304 Spring kit, for Kinsler and Hilborn 6 AN jet can, consists of: .028", .032", .036", .039", .042" 3316 Spring: .016" wire diameter 3317 Spring: .017" wire diameter 3318 Spring: .018" wire diameter 3319 Spring: .019" wire diameter 3321 Spring: .021" wire diameter 3324 Spring: .024" wire diameter 3328 Spring: .028" wire diameter 3332 Spring: .032" wire diameter 3336 Spring: .036" wire diameter 3339 Spring: .039" wire diameter 3942 Spring: .042" wire diameter SHIMS FOR 6 AN JET CANS 3034 Shim kit, includes: 1- .183" thick shim and 6- .030" thick shims 3040 Shim, .183" thick, brass 3042 Shim, .020" thick, brass 3043 Shim, .030" thick, brass SHIMS FOR 8 AN JET CANS 3059 Shim kit for 8 AN jet can: (4)- .020" shims, (2)- .060" shims, (1)- .185" shim 3065 Shim for 8 AN jet can: .020" nominal thickness, brass 3066 Shim for 8 AN jet can: .060" nominal thickness, brass 3067 Shim for 8 AN jet can: .185" nominal thickness, brass SPRINGS 3064 Available springs for #3061 and #3050 8 AN jet cans ONLY, (wire diameter x length) .028" x 1.500"; .035" x 1.525"; .050" x 1.425"; .061" x 1.475"; .075" x 1.500"; .080" x 2.050" Specify size when ordering 3078 Spring kit, for 8 AN jet can, includes 1 each of the above eight springs 3130 Spring kit, for 8 AN jet can, 'Light' four spring assortment, 3-40 PSI 3131 Spring kit, for 8 AN jet can, 'Heavy' four spring assortment, 38-300 PSI 8 AN HIGH FLOW JET CAN 3061 Brass jet can, 8 AN, precision ground stainless steel poppet and spring 3050 Aluminum jet can, 8 AN, precision ground stainless steel poppet and spring 3062 Poppet, for #3061 and #3050 jet can 3055 H-type jet can, 8 AN, hard anodized aluminum with poppet and spring 3057 Poppet, for #3055 ONLY, hard anodized aluminum 3058 For #3055 8 AN jet can ONLY: .024" or .047 wire diameter

RkJQdWJsaXNoZXIy ODE2MjA=