Kinsler_Handbook_#32 December 2017

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 93 3081 Brass High-Flow 6 AN jet can high speed 3157 Hard-anodized aluminum High-Flow 6 AN jet can high speed 3085 End cap ONLY, brass 3150 End cap ONLY, hard-anodized aluminum 3086 Body ONLY, brass 3151 Body ONLY, hard-anodized aluminum 3087 Poppet, precision ground stainless steel 3089 Labor; pressure set valve on flow bench to pressure of customer's application/request 3074 O-ring set, includes body and jet sealing 3034 Shim kit, consists of: 1- .183" and 6- .030" thick shims 3040 Shim, .183" thick, brass 3042 Shim, .020" thick, brass 3043 Shim, .030" thick, brass 3303 Spring kit, consists of: .016", .018", .019", .021", .024" 3304 Spring kit, consists of: .028", .032", .036", .039, .042" HIGH SPEED BYPASS VALVE KINSLER 6 AN HIGH FLOW JET CAN HIGH SPEEDS AND COMPONENTS NOTE: Maximum operating pressure: 150 PSI Normally closed- no power applied valve is CLOSED, valve opens when power is applied. Normally open- no power applied valve is OPEN, valve closes when power is applied. KINSLER 12-VOLT ELECTRIC LEAN-OUT OR ENRICHMENT VALVES #3081 high-flow 6 AN brass jet can Springs may be purchased separately. Last two digits of part number is wire diameter. example: Part #3339 = .039” wire diameter spring Ken Regenthal’s ‘Carolina Hooker’ Kinsler modified Crower injection system on a big block Chev making a 4.88 second ; 147+, 1/8 mile pass Hank Scott Racing (HSR) 1100cc oil cooled Su- zuki engined Mini-Sprint Oval Track Car. Kinsler modular motorcycle injection assembly (see Pages #40-41) with constant flow metering © 2017 For more technical in- formation on this valve see Page #168 #6062 6060 Valve only, includes electrical connector, NO fittings, 1/4" female NPT ports, normally closed 6061 Valve only, includes electrical connector, NO fittings, 1/4" female NPT ports, normally open 6062 Same as #6060 with 6 AN male flare inlet fitting and restrictor jet provision which holds Kinsler or Hilborn jets 6063 Same as #6061 with 6 AN male flare inlet fitting and restrictor jet provision which holds Kinsler or Hilborn jets

RkJQdWJsaXNoZXIy ODE2MjA=