Kinsler_Handbook_#32 December 2017

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 59 TOP ADAPTER - SPECIAL Air cleaner adapters installed on Kinsler Pontiac Pro- Stock injection manifold with EFI for street use RADIUS PLATES FOR AIR FILTERS ON KINSLER BIG BLOCK CHEVROLET INJECTION MANIFOLD 7855 Individual siamese radius plate for 2 1/2" throttle bore size 7857 Individual siamese radius plate for 2 5/8" throttle bore size 7858 Individual siamese radius plate for 2 11/16" throttle bore size 7862 Set of (4) siamese raduis plates, any of the above sizes - outright purchase 7864 Upgrade on purchase of NEW V8 manifold, replaces the cast ramtube adapters and aluminum ramtubes with radius plates 7871 Individual single radius plate for 2 1/2" throttle bore size 7873 Individual single radius plate for 2 5/8" throttle bore size 7874 Individual single radius plate for 2 11/16" throttle bore size 7943 Spacer, for 2 1/2", 1/2" tall, billet aluminum 7982 Spacer, for 2 1/2", 1" tall, billet aluminum 7945 Spacer, for 2 5/8", 1/2" tall, billet aluminum 7984 Spacer, for 2 5/8", 1" tall, billet aluminum 7946 Spacer, for 2 11/16", 1/2" tall, billet aluminum 7985 Spacer, for 2 11/16", 1" tall, billet aluminum 7876 Set of (4) single radius plates, any of the above sizes - outright purchase 7877 Set of (8) single radius plates, any of the above sizes - outright purchase 7878 Upgrade on purchase of NEW 4-cylinder manifold, replaces the cast ramtube adapters and aluminum ramtubes with radius plates 7879 Upgrade on purchase of NEW V8 manifold, replaces the cast ramtube adapters and aluminum ramtubes with radius plates Fit all Kinsler big block Chev manifolds: Standard one-piece rectangular port, three piece Dart Big-Chief, Pontiac Pro-Stock, and EPD. Has the same 4-bolt pattern and bore centers as the Kinsler big block Chev manifold. Billet aluminum, .750” overall height. 7750 Individual 2.9" throttle bore size, 3.300" bore center to center 7751 Individual 3.0" throttle bore size, 3.300" bore c-c 7752 Individual 3.15" throttle bore size, 3.400" bore c-c 7754 Set of (4) radius plates, any of the above sizes - outright purchase 7755 Upgrade on purchase of NEW V8 manifold, replaces the cast ramtube adapters and aluminum ramtubes with radius plates © 2017 SINGLE - Fits all of Kinsler big block 4-runner injection manifolds: Ford, Chevrolet, and Olds. 7766 Individual 2.9" throttle bore size 7767 Individual 3.0" throttle bore size 7768 Individual 3.15" throttle bore size 7770 Upgrade on purchase of NEW V8 manifold, replaces the cast ramtube adapters and aluminum ramtubes with radius plates 7756 Individual 2.9" throttle bore size, 3.300" bore center to center 7757 Individual 3.0" throttle bore size, 3.300" bore c-c 7758 Individual 3.15" throttle bore size, 3.400" bore c-c 7760 Set of (4) radius plates, any of the above sizes - outright purchase 7761 Upgrade on purchase of NEW V8 manifold, replaces the cast ramtube adapters and aluminum ramtubes with radius plates RADIUSED INLET PLATES FOR KINSLER BIG BLOCK RADIUSED DOUBLE INLET PLATES Bolts to Kinsler 3-piece small block Chev, Mopar, and Pontiac manifolds, with 3-bolt pattern. Bore centers are 2.850” c-c. Billet aluminum, 1.550” overall height. RADUISED SINGLE BORE INLET PLATES Bolts to manifold using the 2-bolt pattern (3.740” c-c) of the Kinsler 3-piece injection manifold for small block Ford, and small block Chev with cylinder heads: Dart/Buick, SB2, Brodix Canted Valve or BD-2000, Chev Symmetrical Port, and LS-1. Billet aluminum, 1.750” overall height. Radiused double inlet plate ‘Monster’ small block Chev with radiused inlet plates #7873 Radiused single inlet plate #7984 Spacer #7945 Spacer Radius plates are available for Dragon Claw and Monster manifolds Ultra short style, bolts through radii

RkJQdWJsaXNoZXIy ODE2MjA=