Kinsler_Handbook_#32 December 2017

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. Phone (248) 362-1145 Fax (248) 362-1032 53 PLENUM LOGS CHEVROLET SMALL BLOCK Fits Moon small block Chev cross-ram. Cast aluminum plenum logs are machined with the bolt pattern of a pair of IDA Weber throttle bodies. Center to center of runner bores: 3.470”, 4.025”, 3.470” Each log has provision for a 2 1/4” throttle at the front with cross-connecting linkage, or they can be supplied without the throttles. Ideal for turbo-charging. Small block Chev crossram with Lucas mechanical timed injection Logs with 2.5” throttle plates, on Kinsler 3-piece Pontiac Pro-Stock manifold with aluminum fuel rails Log with no throttle plate. 2.9” ID hose connection and 3.0” runner outlets to manifold Log with 2.5” throttle plate and 2.5” runner outlets to manifold © 2017 Available with a throttle at the inlet or plain. Two throttle sizes available: 2.5” throttle has 2.5” ID runner outlets. 2.9” throttle has 2.9” or 3.0” ID runner outlets. Center to center of runner bores: 3.300”, 6.350”, 3.300” Each runner entrance has a generous radius cast into it. Logs have provision for balance tube between the pair. ‘As cast’ logs have a throttle body on each end at different lengths, so the throttle shafts of both throttles will line up with each other. For most applications only two throttle bodies are needed so the opposite end of the log is machined off, and an end cap is installed. Logs can be machined so there is a throttle body or hose attachment at both ends. Fits: Dart Big Chief, Dart/Olds 14 0 , Pontiac Pro-Stock, and EB 650/800 cylinder heads. Fits one piece big block Chevrolet manifold (modification required). CHEVROLET BIG BLOCK