Kinsler_Handbook_#32 December 2017

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 43 KINSLER 4-BARREL THROTTLE BODY Machined from a solid billet of 6061-T6 aluminum. Bronze throttle shaft bushings, dual milledhard-nickel plated throttle shafts (stainless steel is available for marine use), throttle arms, throttle stopswithsafety returnsprings, connector link, and 8AN port plug for remote IAC port in base of throttle body. Special Order - name area can be custom machined with your personalized logo. Standard Finish - body is machined, linkage is blue anodized. Custom finish - polishing and/or anodizing of throttle body housing and linkage. © 2017 14105 Throttle size 1.525", approx. 750 CFM @ 1.5 Hg or 20.4" water 14107 Throttle size 1.700", approx. 1000 CFM @ 1.5 Hg or 20.4" water 14118 Throttle size 1.875", approx. 1325 CFM @ 1.5 Hg or 20.4" water 14120 Throttle size 2.0", approx. 1600 CFM @ 1.5 Hg or 20.4" water OPTIONS - FOR STANDARD AND HIGH-FLOW THROTTLE BODIES HIGH-FLOW SERIES Has Holley 4500 Dominator bolt pattern. Overall height is 3.5”, bolt pattern c-c is 5.375” x 5.375”. Has standard 7 5/16” diameter neck for air filter and hole tapped for 1/4-20 stud. Remote idle air control housing and motor available (see below). Weighs approx. 8 pounds. 14110 Progressive linkage kit, installed. Front pair of throttle plates opens halfway before the rear throttle plates begin to open 14112 Installation of Kinsler bolt-on TPS boss with drive coupler. Common TPS's: Delco or CTS (lever style), Ford (D-shape), Ford or CTS (two drive dogs inside a .475" I.D. pocket), Rochester (cross style), and others available. See Pages #147- 148 for throttle position sensors and bolt-on bosses with drive couplers 6199 Plug for idle air control (I.A.C.) motor, 20mm x 1.5, billet aluminum with o-ring seal. For Kinsler Standard series throttle body ONLY 10660 Idle air control (IAC) motor, GM style, 20mm x 1.5 thread 10662 Remote idle air control motor housing, high flow, for #10660 IAC motor, 3/8" NPT 10663 K&N air filter for #10662 remote idle air control motor housing 3535 Mounting bracket, constant flow barrel valve to Standard series throttle body 3536 Mounting bracket, constant flow barrel valve to High-Flow series throttle body Standard series with polish and pro- gressive linkage options High-flow series with polish and progressive linkage options Progressive linkage option Constant flow on high flow throttle body Constant flow on standard series throttle body Ultra high flow twin blade throttle body, dominator flange, call us STANDARD SERIES Has Holley 4150 bolt pattern. Has standard 5” diameter neck for 5 1/8” air filter base and hole tapped for 1/4-20 stud. Overall height is 3”, bolt pattern c-c front to rear is 5.605”, and c-c left to right is 5.155”. Unit has provision for GM style idle air control motor. Order motor seperately, part #10660 (see below). Weighs approx. 5 3/4 pounds. Standard series throttle body with idle air control motor (IAC)

RkJQdWJsaXNoZXIy ODE2MjA=