Kinsler_Handbook_#32 December 2017

220 Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 . Metal Tubing: Standard length in stock is 36” We can cut special lengths U and L BENDS / CONNECTOR HOSE CONNECTOR HOSE - STRAIGHT . *** Hose sold ONLY in 18” and 36” sections *** Rick Es- sary’s alcohol Super Stock Pulling Tractor Note on Connecting Tubing : Putting a bead around the end of both of the tubes is OK, but under boost conditions there is still a good chance that the two pieces will blow apart causing not only loss of boost but depending on where fuel is being injected a fire hazard. The best thing to do is to weld an ear/flange on both pieces then either safety wire them together, or even better, bolt them together. CONNECTOR HOSE - 90-DEGREE ELBOWS 4-ply reinforced silicone. Blue on the outside and red on the inside. 1880 2" I.D. x 4" radius, 10 1/2" x 18 1/2" legs 1881 2 1/4" I.D. x 2 1/4" radius, 8 1/2" x 18" legs 1882 2 1/2" I.D. x 3" radius, 6" x 10" legs 1883 2 3/4" I.D. x 3 1/2" radius, 8" x 14" legs 1884 3" I.D. x 3" radius, 7 1/2" x 12" legs 18” LONG 1835 1 3/4" I.D. 1836 2" I.D. 1837 2 1/8" I.D. 1838 2 1/4" I.D. 1839 2 3/8" I.D. 1840 2 1/2" I.D. 1841 2 5/8" I.D. 1842 2 3/4" I.D. 1843 3" I.D. 1844 3 1/4" I.D. 1845 3 1/2" I.D. 36” LONG 1941 1 3/4" I.D. 1942 2" I.D. 1924 2 1/8" I.D. 1943 2 1/4" I.D. 1944 2 3/8" I.D. 1945 2 1/2" I.D. 1946 2 5/8" I.D. 1947 2 3/4" I.D. 1948 3" I.D. 1949 3 1/4" I.D. 1950 3 1/2" I.D. © 2017 BAND CLAMPS Stainless steel worm gear style, .560” wide band. 1870 Range of hose O.D. from 1 13/16" to 2 3/4" 1871 Range of hose O.D. from 2 1/16" to 3" 1872 Range of hose O.D. from 2 5/8" to 3 1/2" 1873 Range of hose O.D. from 2 13/16" to 3 3/4" 3-ply glass fiber reinforced silicone, orange. Silicone provides mechanical, thermal, electrical and chemical superiority over rubber or any other elastomer. It is resistant to: wide range of temperature, hardening, cracking, moisture, steam, chemicals, solvents, fuels, oils. It is strong yet flexible, and gives long service life. TUBE SECTIONS Aluminum, type 6061, .065” thick wall 5860 1 3/4" O.D. 5861 2" O.D. 5862 2 1/4" O.D. 5863 2 1/2" O.D. 5864 3" O.D. Stainless steel, type 321, .065” thick wall 5866 1 3/4" O.D. 5867 2" O.D. 5868 2 1/8" O.D.

RkJQdWJsaXNoZXIy ODE2MjA=