Kinsler_Handbook_#32 December 2017

186 Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 FITTINGS PORT PLUGS © 2017 FITTING - AN MALE FLARE X METRIC Hard-anodized aluminum, compatible with alcohol. 6181 6 AN male flare x 12mm 1.5 male 6183 6 AN male flare x 14mm 1.5 male 6182 8 AN male flare x 12mm 1.5 male 6186 8 AN male flare x 14mm 1.5 male AN ADAPTER BUSHING 6102 3 AN female with o-ring pocket x 8 AN male + o-ring, aluminum 6103 6 AN female with o-ring pocket x 8 AN male + o-ring, aluminum 6169 3 AN + o-ring, hard-anodized aluminum 6166 6 AN + o-ring, hard-anodized aluminum 6168 8 AN + o-ring, hard-anodized aluminum 6197 10 AN + o-ring, aluminum FITTING - AN MALE FLARE X INVERTED FLARE METRIC 6189 6 AN male flare x 12mm 1.5 female, steel 6188 6 AN male flare x 14mm 1.5 female swivel, stainless steel PLUG FOR 1/2-20 NOZZLE BOSS Ideal for blocking off nozzle boss in injection manifold if ‘down’ nozzles are being used. 6160 Alumminum, blue anodized, includes o-ring PLUG FOR 14MM NOZZLE BOSS Ideal for blocking off nozzle boss in injection manifold were Lucas mechanical nozzle was located. Sealing spark plug holes for engine storage 6161 Alumminum, blue anodized, includes o-ring PLUG FOR GM IDLE AIR SPEED MOTOR PORT Ideal for sealing the Idle Air Control (I.A.C.) motor port in Kinsler standard series four barrel throttle body when I.A.C. is not being used, 20mm x 1.5. 6169 Alumminum, blue anodized BULKHEAD Ideal for mounting shut-off onto fuel pump, etc. Anywhere that two parts need to be closely mounted. Radius on both ends for good flow. Steel fitting for strength and alumi- num nut, includes o-rings. 35337 6 AN male + o-ring x 6 AN bulkhead with nut + o-ring 35338 6 AN male + o-ring x 8 AN bulkhead with nut + o-ring 6048 8 AN male + o-ring x 6 AN bulkhead with nut + o-ring 6047 8 AN male + o-ring x 8 AN bulkhead with nut + o-ring 35346 10 AN male + o-ring x 8 AN bulkhead with nut + o-ring 35347 10 AN male + o-ring x 10 AN bulkhead with nut + o-ring 35339 12 AN male + o-ring x 8 AN bulkhead with nut + o-ring 35348 12 AN male + o-ring x 10 AN bulkhead with nut + o-ring 35349 12 AN male + o-ring x 12 AN bulkhead with nut + o-ring FITTING - AN MALE FLARE X MALE METRIC + O-RING 6185 6 AN male flare x 16mm 1.5 male, blue anodized aluminum 6186 8 AN male flare x 16mm 1.5 male, blue anodized aluminum FITTING - AN X BSP 8281 6 AN male flare x 1/4" BSP, straight, chrome plated steel 8282 6 AN male flare x 1/4" BSP, straight, blue anodized aluminum 8277 6 AN male flare x 3/8" BSP, straight, plated steel 8279 8 AN male flare x 1/4" BSP, straight, plated steel 8280 8 AN male flare x 1/4" BSP, straight, blue anodized aluminum Y FITTINGS #6123 6122 6 AN male flare x two 6 AN male flare branches 6123 8 AN male flare x two 6 AN male flare branches 6124 8 AN male flare x two 8 AN male flare branches 6126 10 AN male flare x two 8 AN male flare branches 6127 10 AN male flare x two 10 AN male flare branches 6128 12 AN male flare x two 10 AN male flare branches #6187 #6190 #6270 MISC. FITTING 6187 6 AN male flare x 16mm 1.5 female, 1 1/4" long, hard anodized aluminum, requires Loctite 6190 6 AN male flare x 12mm 1.5 female, internal flare seat, steel 6270 Reducer bushing, 12mm female x 16mm male, steel

RkJQdWJsaXNoZXIy ODE2MjA=