Kinsler_Handbook_#32 December 2017

181 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 Kinsler Fuel Injection, Inc, ALUMINUM TANKS AND COMPONENTS Our tanks are in stock and pressure tested for immediate shipment. Brushed spun aluminum, approx. .080” thick wall. All tanks have three bungs (3/8” female NPT) located near the top, one outlet (3/4” female NPT), one drain ( 1/8” NPT), and screw on filler cap ( 2 1/4” ID). Custom built tanks are available. Individual components can be purchased. KINSLER ALUMINUM TANKS MOUNTING BRACKETS FOR ALUMINUM TANKS CAPS WITH WELD-IN BUNGS 5810 Pair, for 8 1/2" diameter tank only, formed steel strap design, black epoxy painted 5816 Tank half, 1-gallon, 5" long x 8 1/2" diameter 5817 Tank half, 1 3/4-gallon, 7 1/2" long x 8 1/2" diameter 5818 Tank half, 2 1/2-gallon, 10" long x 8 1/2" diameter 5800 2-gallon, horizontal, 10" long x 8 1/2" diameter 5801 3 1/2-gallon, horizontal, 15" long x 8 1/2" diameter 5802 5-gallon, horizontal, 20" long x 8 1/2" diameter 5806 6-gallon, horizontal, 27" long x 8 1/2" diameter BODY HALVES FOR ALUMINUM TANK One solid piece, brushed spun aluminum, approx. .080” thick wall. BUILDING YOUR OWN TANK... WE WILL BE GLAD TO SUPPLY ANY COMBINATION OF PIECES !!! Custom- made spun aluminum fuel tank 5831 Cap and aluminum weld bung, 2 1/8" I.D. with screw-on cap 5837 Cap only, same as included with #5831 5832 Cap and steel weld bung, 2 1/8" I.D., bayonet/twist-lock cap © 2017 Release compound required with alumi- num screw- on cap to prevent galling and seizing #5816 #5817 #5818

RkJQdWJsaXNoZXIy ODE2MjA=