Kinsler_Handbook_#32 December 2017

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 153 10423 Relay, 30 amp, plug in type, current re-route (Single Pole Double Throw) use #10427 socket 10424 Relay, 20 amp, plug in type, current re-route (SPDT) 10425 Relay, 30 amp, plug in type, metal housing, current connect (SPDT) use #10427 socket 10426 Relay, 30 amp, with Weather Pack connector assembly, current re-route 10427 Socket assembly, for relays #10423 and #10425, locking feature 10428 Socket assembly, for relay #10424, add-on locking feature 10429 Mounting tab, for #10426 relay RELAYS Preferred relay wiring EFI CONNECTORS, RELAYS, AND ACCESSORIES WIRE Temperature range of -76 0 F to +392 0 F, 600 volts. CURRENT REROUTE CURRENT CONNECT © 2017 BALLAST RESISTOR 10430 Lucas model '2PR', current control for using (8) low impedance (2-3.5 ohm) injectors on ECU equipped with saturation drivers or limited drive stages, with mating connector and pins #10430 10442 Heat shrink tubing, 1/8" inside diameter 10443 Heat shrink tubing, 3/16" inside diameter 10444 Heat shrink tubing, 1/4" inside diameter 10445 Heat shrink tubing, 3/8" inside diameter 10446 Heat shrink tubing, 1/2" inside diameter 10447 Heat shrink tubing, 3/4" inside diameter 10448 Heat shrink tubing, 1" inside diameter 10449 Heat shrink tubing, 1 1/2" inside diameter 10450 Expandable sleeve, 1/8" to 7/16" range s ize, polyester, 10 foot length 10451 Expandable sleeve, 1/4" to 3/4" range size, polyester, 10 foot length HEAT SHRINK TUBING Heat Shrink Tubing is in 4-foot long sections and black. Select appropriate diameter tubing for wire gauge, cut tubing to length desired, slide over wire before terminating, position over connection, use radiant heat gun to shrink tubing tight to wire. Do not use open flame to heat tubing. EXPANDABLE SLEEVE AND TY-RAP CABLE TIES 10450 Expandable sleeve, 1/8" to 7/16" range size, polyester, 10 foot length 10451 Expandable sleeve, 1/4" to 3/4" range size, polyester, 10 foot length 10452 Expandable sleeve, 1/2" to 1 1/4" range size, polyester, 10 foot length 10453 Ty-Rap cable ties, 3 5/8" long, 3/4" max. bundle dia., translucent, 100 pcs. 10454 Ty-Rap cable ties, 5 1/2" long, 1 1/4" max. bundle dia., translucent, 100 pcs. 10455 Ty-Rap cable ties, 7 5/16" long, 1 3/4" max. bundle dia., translucent, 100 pcs. 10440 Shielded wire, one 18 AWG lead inside of braided shield, white teflon jacket, sold per foot 10441 Shielded wire, two 18 AWG lead inside of braided shield, white teflon jacket, sold per foot #10441 #10440 #10425 #10427 #10423 #10428 #10424 socket #10426 #10429 TOOLS AND ACCESSORIES 10400 Extraction tool, Weather Pack connectors, yellow handle, female tube 10465 Extraction tool, Micro-Pack connectors, red handle, .042" x .071" blade 10466 Extraction tool, Metri-Pack connectors, green handle, spring steel tapered blade 10417 Pin extraction tool, Blue Point, green 10416 Crimping tool, Weather Pack connectors, crimps wire to terminal, 14-20 AWG terminals 10530 Crimping tool, Sealed Weather Pack pin and sleeve, core and insulation, 14-20 AWG 10531 Crimping tool, Unsealed Micro-Pack 100, female only, core and insulation, 14-22 AWG 10532 Crimping tool, Sealed Metri-Pack 150 & 280, core and insulation, 14-20 AWG 10418 Tweek Contact Enhancer, brush-on applicator, 7 ml bottle 10419 Corrosion preventitive grease, for electrical contacts #10419 #10418 #10466 #10400 #10530

RkJQdWJsaXNoZXIy ODE2MjA=