Kinsler_Handbook_#32 December 2017

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 130 ELECTRIC FUEL PUMPS © 2017 12340 Dial-A-Flow kit; includes controller, six foot cable with a potentiometer installed at one end, a switch, five terminals, and a knob for the potentiometer 10237 Kit for supercharged/turbocharged applications 10238 Kit for normally aspirated (unblown) applications BOOST-A-PUMP ENHANCER SYSTEM Raises voltage to electric fuel pump for increased flow output. Note: Requires additional amperage (40 amp max.) from electrical system on vehicle. Kit consists of: enhancer box, wiring harness, remote mounted control knob with cable. Unit can be activated either by a toggle switch, pressure switch, or vacuum switch. The voltage to the pump can be adjusted using the remote mounted control knob to obtain the required flow, see example below. #10237 Example : Kinsler #10211 fuel pump with head pressure held at 40 PSI and the voltage supply held at 13.2 volts. Example : Kinsler #10297 fuel pump with head pressure held at 70 PSI and the voltage supply held at 13.2 volts. BOOST-A-PUMP PERCENTAGE SUPPLY AMPERAGE PUMP VOLTAGE PUMP AMPERAGE PUMP OUTPUT lbs/hr OFF 10.1 12.1 10.1 410 0 16.7 15.2 12.8 515 10 17.7 15.7 13.2 530 20 19.9 16.6 13.7 550 30 23.0 17.6 15.0 600 40 26.4 18.7 16.1 625 50 29.2 19.6 16.8 650 BOOST-A-PUMP PERCENTAGE SUPPLY AMPERAGE PUMP VOLTAGE PUMP AMPERAGE PUMP OUTPUT lbs/hr OFF 16.4 11.9 16.3 825 0 23.2 15.2 17.7 1110 10 24.2 15.7 17.7 1150 20 26.4 16.7 18.3 1220 30 29.0 17.8 18.6 1320 40 29.1 18.9 17.6 1405 50 30.2 19.8 17.4 1445 SEE PUMP PAGES #124 - 129 " D IA L -A -F LOW" - OF F : PSI lbs/hr AMPERAGE 0 480 7.7 50 425 10.5 70 405 11.7 100 365 13.6 " D IA L -A -F LOW" - ON, S E T AT F UL L: PSI lbs/hr AMPERAGE 0 370 3.7 50 325 6.7 70 305 8.3 100 280 10.4 " D IA L -A -F LOW" - OF F : PSI lbs/hr AMPERAGE 0 685 7.9 50 615 10.1 70 590 11.4 100 540 13.4 120 500 14.7 " D IA L -A -F LOW" - ON, S E T AT F UL L : PSI lbs/hr AMPERAGE 0 495 5.0 50 450 6.8 70 415 8.3 100 390 10.5 120 360 11.9 WELDON “DIAL-A-FLOW” The Weldon Dial-A-Flow voltage regulator, with pulse width modulation is a superb fuel pump controller. It allows the user to slow down their fuel pump, reducing the amperage draw, quieting the pump, and reducing the potential heat build up in the fuel system, when the pump’s full fuel flow is not required. It is designed to regulate the speed of a pump motor under changing flow rates while maintaining constant pressure. Example : Kinsler #10211 Bosch fuel pump Example : Kinsler #10295 Weldon fuel with voltage supply held at 13.2 volts. with voltage supply held at 13.2 volts.

RkJQdWJsaXNoZXIy ODE2MjA=