Kinsler_Handbook_#32 December 2017

Kinsler Fuel Injection, Inc, 1834 THUNDERBIRD TROY, MICHIGAN 48084 U.S.A. www.Kinsler.com Phone (248) 362-1145 Fax (248) 362-1032 114 PLUMBING SCHEMATIC FOR ENDERLE BLOWER HAT AND BARREL VALVE ASSEMBLY WITH PORT NOZZLES KINSLER’S CONVERSION FROM ENDERLE’S JET-IN-THE- BARREL-VALVE TO KINSLER EXTERNAL BYPASS SYSTEM. Kinsler is pleased with the quality of Enderle’s blower hats, but we prefer not to use their jets or nozzles for two reasons: They are sharp edged and the jets have a screw driver slot. As mentioned in “A Note About Jets”, square edged jets are easily damaged... the use of the screw driver in the slot further aggravates the problem. Changing to the Kinsler external bypass system and using the K-type jets eliminated the problem. Many of the racers also prefer the external bypass system for it’s greater flexibility in tuning and ease of operation. © 2017

RkJQdWJsaXNoZXIy ODE2MjA=